Sennheiser BW 900 - Manual (Page 23)

Advanced settings
23
Rejecting a call from the Bluetooth device
f
Press the multi switch
ቤ
in “push” direction.
Depending on the Bluetooth device settings, the call is transferred to a
voice mailbox.
Note:
It is not possible to reject an office phone call. But you can mute the
ring tone as described in “Muting the ring tone” on page 23.
Muting
Muting/unmuting the headset microphone
To mute the headset microphone:
f
Press the multi switch
ቤ
in “push” direction during a conversation.
On the base station, the mute LED ² lights up red constantly. A high
frequency beep is heard every 5 seconds in the headset.
To unmute the headset microphone:
f
Press the multi switch
ቤ
in “push” direction.
On the base station the mute LED
²
goes off. The beeping stops.
Muting the ring tone
To mute the ring tone in the headset:
f Press the multi switch
ቤ
in “push” direction while a ring tone is being
heard in the headset.
The ringing stops. However, you can still accept the call by pressing
the base station hook button
·
or the headset hook button
ብ
.
Listening to an external audio source
To establish a link to a Bluetooth audio source:
f Pair the headset with the audio source as described under “Connecting
the headset to other Bluetooth devices” on page 11.
f
Use the audio source to establish a Bluetooth connection to the head-
set (the headset hook button
ብ
does not work with external audio
sources).
The headset accepts the audio signal automatically. The audio is heard
in the headset.
Note:
During the reception of a Bluetooth audio source the headset is unable
to detect or to make any call via your mobile or office phone!
To end the link to a Bluetooth audio source:
f
Press the headset hook button
ብ
or use the audio source to end the
Bluetooth connection to the headset.