Sony spp-n1025 - Manual (Page 12)

Getting Started 12 US
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
1
Press (PGM).
2
Raise or lower the Jog lever until
“DIAL MODE” appears on the
display.
3
Press (SELECT).
4
Raise or lower the Jog lever to choose
the dialing mode (“TONE” or
“PULSE”), and then press (PGM).
You will hear a long confirmation
beep.
Note
Do not allow more than 20 seconds to elapse between each step of the procedure.
Tip
You may press (SELECT) instead of pressing (PGM) in step 4.
If you aren’t sure of your dialing system
Make a trial call with the dialing mode set to “TONE”.
If the call connects, leave the setting as is; otherwise, set to “PULSE”.
DIAL MODE: TONE
Step 4