Sony spp-n1025 - Manual (Page 20)

Basics 20 US
(SPEAKERPHONE)
LINE lamp
(REDIAL/PAUSE)
(CALL WAITING/FLASH)
(*TONE)
(HOLD)
(VOLUME)
Making calls (continued)
Making calls through the speakerphone
Press (SPEAKERPHONE) on the base phone.
The SPEAKERPHONE button and the
LINE lamp light up.
Dial the phone number.
When you are done talking, press
(SPEAKERPHONE) again.
Additional tasks
To
Put a call on hold
Adjust the speaker volume
Switch to tone dialing
temporarily
Switch to another call
(“call waiting” service*)
* You need to subscribe to the service from your telephone company.
Do this
Press (HOLD).
The LINE lamp flashes slowly.
Press (SPEAKERPHONE) to resume the conversation.
Press (VOLUME) or .
Press (*TONE) while using the telephone after
you’re connected.
The line remains in tone dialing until disconnected.
Press (CALL WAITING/FLASH) to access the flash
function.
Press (CALL WAITING/FLASH) again to return to the
first caller.
To obtain the best speakerphone performance
• You may not be able to hear the other party’s voice in a noisy place.
Therefore, use the speakerphone in a quiet room.
• Do not bring your hand or other object too close to the microphone
or you will hear a shrill noise (“feedback”).
• When the speaker volume is loud, or the telephone has been placed
close to a wall, you may find that the volume drops suddenly. This is
due to a circuit in the telephone designed to protect against
feedback. In such cases, lower the speaker volume slightly.