Sanyo VPC-AZ3 EX - Manual (Page 157)

To select one image and print it
Procedure to select one still image and print it.
1
Complete the printing setup (see
page 152).
2
Select “SELECT MODE”, and press
the SET button.
œ The screen to select images for
printing appears.
3
Press [ d ] or [ c ] on the arrow button
to display an image to print, and
press the SET button.
œ The Print Mode Screen appears.
œ The rest of the procedure is the
same as “To print the images that
are set to print” on page 153.
NOTE
To cancel printing
1
During printing, press the MENU button.
œ The confirmation screen to cancel printing appears.
2
Select “YES”, and press the SET button.
œ If “EXIT” is selected, printing resumes.
ª p
SELECT MODE
SETTING
EXIT
SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002
English
154