Sony DAV-DZ380W - Manual (Page 75)

Contr
o
l f
o
r HDMI/
Extern
al A
u
dio
D
e
vic
e
75 GB
sound is output from the system speakers
automatically.
• While you are watching the TV and the
function of the system is switched to “DVD”
or “USB,” sound of the selected system
function is output from the system speakers;
TV sound is not output via the TV speakers.
• You can control the system’s volume by the
remote of the TV.
• If you turn the system off or set the function of
the system to other than “TV,” “DVD,” or
“USB,” TV sound is output from the TV
speakers.
You can also operate the System Audio Control
function via the TV menu. For details, refer to
the operating instructions of the TV.
Note
• While the TV is in PAP (picture and picture) mode,
the System Audio Control function will not work.
When the TV exits PAP mode, the output method of
the TV returns to the one before PAP mode.
• While transferring songs on an audio CD onto a USB
device, the System Audio Control function will not
work.
Tip
• You can connect the system and the TV audio
digitally. For details, see page 26.
(Volume Limit)
If you change the output method of the TV to the
system speakers via the TV menu (or by
pressing THEATRE), loud sound may be output
depending on the volume level of the system.
You can prevent this by limiting the maximum
level of the volume. For details, see “[VOLUME
LIMIT]” (page 65).
(Language Follow)
When you change the language for the on-screen
display of the TV, the system’s on-screen
display language is also changed. However,
when the system’s on-screen display is
displayed, this function does not work.
Setting the Maximum Volume
Level of the System
Changing the language for the
on-screen display of the TV