Sony DAV-DZ380W - Manual (Page 89)

Contr
o
l f
o
r HDMI/
Extern
al A
u
dio
D
e
vic
e
89 GB
Using an S-AIR Product
The unit is compatible with the S-AIR function
(page 120), which allows sound transmission
between S-AIR products.
About S-AIR products
There are two types of S-AIR products.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
– Surround amplifier: You can enjoy
surround speaker sound wirelessly.
– S-AIR receiver: You can enjoy system
sound in another room.
Note
• You cannot operate this function if you do not insert
the wireless transceiver into the unit correctly
(page 32).
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission.
To set the ID of the unit
1
Press "/1 on the unit.
The system turns on.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until “S-AIR ID”
appears in the front panel display, then
press
or c.
4
Press X/x to select the desired ID.
You can select any ID (A, B, or C).
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
7
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
Tip
• To confirm the current ID, perform Steps 1 to 3
above. When you pair the unit with the S-AIR sub
S-AIR sub unit
(surround amplifier)
S-AIR main unit
S-AIR sub unit
(S-AIR receiver)
Room A
Room B
Establishing sound
transmission between the unit
and S-AIR sub unit
(ID setting)
For the surround amplifier
For the S-AIR receiver
ID A
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR sub unit