Sun Microsystems Sun Fire V40z - Manual (Page 49)

Appendix A Preconfiguring Your Network to Support PXE Installation 43
Copying Files From the Documentation and
Support Files CD
This section describes how to copy the PXE support files, which are required for PXE
configurations, from the Sun Fire V20z and Sun Fire V40z Servers Documentation
and Support Files CD.
You can also download the driver RPMs from the Sun Fire V20z or
Sun Fire V40z server Downloads links at:
http://www.sun.com/servers/entry/v20z/
http://www.sun.com/servers/entry/v40z/
1. Insert the Sun Fire Documentation and Support Files CD into the DHCP/PXE
server.
2. Type the following commands to copy the files to the /tmp/ directory.
# mount /dev/cdrom /mnt/cdrom
# cp /mnt/cdrom/support/pxeboot/rhel3_64-pxefiles.tar.gz /tmp/
3. Uncompress and extract the contents of the tar file into the /tmp/ directory by
typing the following command:
# tar -zxf /tmp/rhel3_64-pxefiles.tar.gz
When you extract the file, a directory with all required files is created at
/tmp/rhel3_64-pxefiles/