Sound Performance Lab Vox Ranger Graphic Equalizer For The Vocal Range 2718 - Manual (Page 9)

RackPack: Vox Ranger 9
The Vox Ranger is fitted with one XLR input and two XLR outputs for
balanced operation.
Pin-wiring of all XLR sockets:
Pin 1 = GND, Pin 2 = hot (+), Pin 3 = cold (-)
Discrete balancing stages for both in- and output provide high common
mode rejection and are capable of driving long cables (depending on
the capacity of the cables and the following input balancing stages).
The illustration shows the correct pin-wiring of the balanced XLR sock-
ets if an unbalanced wiring is required.
Lundahl I/O Transformers
The Input and Output 1 stages may be transformer-balanced if ordered
(please refer to page 20 for detailed information). Otherwise, all
inputs and outputs are balanced electronically. Output 2 cannot be fit-
ted with a transformer. It is actively decoupled and allows for the input
signal to be split into two output signals.
Channel Split
The channel split option through Output 2 always provides alterna-
tives in processing or routing of the input channel. While one output
may be used directly for mixing, the second output can be routed in
any other way—for example to further RackPack modules, to other
effect units etc.
Rear Panel/Connections
XLR Sockets, Transformers, Channel Split
*OQVU 0VUQVU
CBMBODFE VOCBMBODFE CBMBODFE VOCBMBODFE
 (/%
 IPU

 DPME