Sharp XG-C40XU - Manual (Page 26)

E-25
Operation
Using the GUI (Graphical User Interface) Menu Screens
(GUI) On-screen Display
1
INPUT 1 or 2 (COMPUTER/RGB) mode
1
INPUT 3 or 4 (VIDEO/S-VIDEO) mode
4 (Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU to display the INPUT 1, 2, 3 or 4
mode menu bar.
2 Press ß/© to select an adjustment menu on the
menu bar.
3 Press ∂/ƒ to select a specific adjustment item.
4 To display a single adjustment item, press ENTER
after selecting the item. Only the menu bar and
the selected adjustment item will appear.
5 Press ß/© to adjust the item.
6 Press UNDO to return to the previous screen.
7 Press MENU to exit from the GUI.
• For details on items on the menu screen, see the tree charts
on the next page.
Я
2
© Я
2
©
Я
2
©
Я
5
©
MOUSE ADJ.
∂
3
ƒ
∂
3
ƒ
Projector Remote control This projector has two sets of menu screens (INPUT 1
or 2 and INPUT 3 or 4) that allow you to adjust the image
and various projector settings. These menu screens can
be operated from the projector or the remote control
with the following buttons.
4
2, 3, 5
1, 7
6
Я
5
©
Я
5
©