Sharp XG-C40XU - Manual (Page 8)

E-7
Important
Information
Temperature Monitor Function
If the projector starts to overheat due to setup problems or a dirty air filter,
“TEMP.” and “ ” will flash in the lower-left corner of the picture. If the
temperature continues to rise, the lamp will turn off, the TEMPERATURE
WARNING indicator on the projector will flash, and after a 90-second cooling-
off period the power will shut off. Refer to “Lamp/Maintenance Indicators” on
page 49, for details.
• The cooling fan regulates the internal temperature, and its performance is
automatically controlled. The sound of the fan may change during projector operation
due to changes in the fan speed.
Lamp Monitor Function
When the projector is turned on after the lamp has been used for 1,900 hours,
“LAMP” and “ ” will flash in the lower-left corner of the picture to advise you
to replace the lamp. See pages 50 and 51 for lamp replacement. If the lamp
has been used for 2,000 hours, the projector power will automatically turn off
and the projector will enter standby mode. Refer to “Lamp/Maintenance
Indicators” on page 49, for details.
Usage Guidelines
IMPORTANT
• Microsoft and Windows are registered trademarks in the United States and other countries of Microsoft Corporation.
• PS/2 and PC/AT are registered trademarks in the United States of International Business Machines Corporation.
• Acrobat and Acrobat Reader are registered trademarks or trademarks of Adobe Systems Incorporated.
• Macintosh is a registered trademark in the United States and other countries of Apple Computer, Inc.
• The other company and product names mentioned are trademarks or registered trademarks of each respective company.
• This software is based in part on the work of the Independent JPEG Group.