Samsung SRP-350 - Manual (Page 25)

48
① GS k m d1…dk NUL , ② GS k m n d1…dn
[Name]
[Format]
[Range]
[Description] Print bar code.
①
ASCII GS k m d1…dk NUL
Hex 1D 6B m d1…dk 00
Decimal 29 107 m d1…dk 0
②
ASCII GS k m n d1…dn
Hex 1D 6B m n d1…dn
Decimal 29 107 m n d1…dn
①
0 ≤m ≤6 (k and d depends on the bar code system used.)
② 65 ≤m ≤73 (n and d depends on the bar code system used.)
Selects a bar code system and prints the bar-code.
m selects a bar ode system as follows :
m Bar Code System Number of Characters Remarks
0 UPC-A 11 ≤k ≤12 48 ≤ d ≤57
1 UPC-E 11 ≤k ≤12 48 ≤ d ≤57
2 JAN13(EAN13) 12 ≤k ≤13 48 ≤ d ≤57
3 JAN8(EAN8) 7 ≤k ≤8 48 ≤ d ≤57
4 CODE 39 1 ≤k
48 ≤d ≤57,
65 ≤d ≤90, 32, 36, 37, 43, 45, 46, 47
5 ITF 1 ≤k (even number) 48 ≤d ≤57
①
6 CODABAR 1 ≤k
48 ≤d ≤57,
65 ≤d ≤68, 36, 43, 45, 46, 47 ,58
65 UPC-A 11 ≤n ≤12 48 ≤ d ≤57
66 UPC-E 11 ≤n ≤12 48 ≤ d ≤57
67 JAN13(EAN13) 12 ≤n ≤13 48 ≤ d ≤57
68 JAN8(EAN8) 7 ≤n ≤8 48 ≤ d ≤57
69 CODE 39 1 ≤n ≤255
48 ≤d ≤57,
65 ≤d ≤90, 32, 36, 37, 43, 45, 46, 47
d1 = dk = 42(1)
70 ITF
1 ≤n ≤255 (even
number)
48 ≤d ≤57
71 CODABAR 1 ≤n ≤255
48 ≤d ≤57,
65 ≤d ≤68, 36, 43, 45, 46, 47 ,58
72 CODE 93 1 ≤ n ≤255 0 ≤ d ≤127
②
73 CODE 128 1 ≤ n ≤255 0 ≤ d ≤127
GS r n
[Name]
[Format]
[Range]
[Description] Transmit status.
ASCII GS V n
Hex 1D 72 n
Decimal 29 114 n
n = 1, 2, 49, 50
Transmits the status specified by n as follows.
49
GS v 0 m xL xH yL yH d1…dk
[Name]
[Format]
[Range]
[Description] Print raster bit image.
ASCII GS V 0 m xL xH yL yH d1…dk
Hex 1D 76 30 m xL xH yL yH d1…dk
Decimal 29 118 48 m xL xH yL yH d1…dk
0 ≤m ≤3, 48 ≤m ≤51
0 ≤xL ≤255
0 ≤xH ≤255
0 ≤yL ≤255
0 ≤d ≤255
k = (xL + xH Ч256) Ч(yL + yH ×256) (k ≠0)
Selects Raster bit-image mode. The value of m selects the mode, as follows :
m Mode Vertical Dot Density (DIP) Horizontal Dot Density (DIP)
0, 48 Normal 180 DPI 180 DPI
1, 49 Double-width 180 DPI 90 DPI
2, 50 Double-height 90 DPI 180 DPI
3, 51 Quadruple 90 DPI 90 DPI
* xL, xH, select the number of data bits (xL + xH ×256) in the
horizontal direction for the bit image.
* yL, yH, select the number of data bits (yL + yH ×256) in the
vertical direction for the bit image.
GS w n
[Name]
[Format]
[Range]
[Description] Set bar code width.
ASCII GS w n
Hex 1D 77 n
Decimal 29 119 n
2 ≤n ≤6
Set the horizontal size of the bar code.
n specifies the bar code width as follows :
Binary-level bar code
n
Module width for
multi-level bar code Thin element width (mm) Thick element width (mm)
2 0.282 0.282 0.706
3 0.423 0.423 1.129
4 0.564 0.564 1.411
5 0.706 0.706 1.834
6 0.847 0.847 2.258
* Multi-level bar codes are as follows :
UPC-A, UPC-E, JAN13(EAN13), JAN8(EAN8), CODE93, CODE128.
* Binary-level bar codes are as follows :
CODE39, ITF, CODABAR.