Samsung CLX-8385ND Series - Manual (Page 199)

Using Your Printer with a Macintosh
49
Scanning
You can scan docoments using Image Capture program.
Macintosh OS offers Image Capture program.
Scanning with USB
1
Make sure that your machine and computer are turned on
and properly connected to each other.
2
Place a single document face down on the document glass.
OR load the document(s) face up into the ADF (or DADF).
3
Start Applications and click Image Capture.
N OTE : If No Image Capture device connected message
appears, disconnect the USB cable and reconnect it. If the
problem persists, please refer to the Image Capture’s help.
4
Set the scan options on this program.
5
Scan and save your scanned image.
N OTE :
• For more information about using Image Capture, please
refer to the Image Capture’s help.
• Use TWAIN-compliant softwares to apply more scan options.
• You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.
• Scan process differs according to TWAIN-compliant
softwares. Please refer to the user’s guide of the software.
• When scanning does not operate in Image Capture, update
Mac OS to the latest version. Scanning operates propery in
Mac OS 10.3.9 or higher and Mac OS 10.4.7 or higher.
Scanning with network
1 Make sure that your machine and computer are turned on.
2
Place a single document face down on the document glass.
OR load the document(s) face up into the ADF (or DADF).
3
Start Applications and click Image Capture.
4
For MAC OS X 10.4~10.5
Click Devices and click Browse Devices.
For MAC OS X 10.6
Select your device below SHARED. Skip to step 7.
5
For MAC OS X 10.4:
Select your machine in Twain devices option. Make sure
that
Use TWAIN software checkbox is checked, and click
Connect.
If a warning message appears, click Change Port.. to
select port.
If TWAIN UI appears, from the Preference tab, click
Change Port.. to select port.
For MAC OS X 10.5:
Make sure that
Connected checkbox is checked beside
your machine in Bonjour Devices.
If you want to scan using TWAIN, refer to the MAC OS X
10.4 procedure above.
6
Set the scan options on this program.
7
Scan and save your scanned image.
N OTE :
• For more information about using Image Capture, please
refer to the Image Capture’s help.
• Use TWAIN-compliant softwares to apply more scan options.
• You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.
• Scan process differs according to TWAIN-compliant
softwares. Please refer to the user’s guide of the software.
• When scanning does not operate in Image Capture, update
Mac OS to the latest version. Scanning operates propery in
Mac OS 10.3.9 or higher and Mac OS 10.4.7 or higher.
• For MAC OS X 10.3, use TWAIN-compliant softwares.