Samsung CLX-8385ND Series - Manual (Page 62)

6.7
<Faxing (Optional)>
Adjusting the document settings
Before sending a fax, you can adjust the document settings, such as
resolution, darkness, color, duplex and so forth. Refer to explanation of
this section.
Note
The document setting herein is for only current job. If you want
to change the default setting on document settings, refer to
Admin Setting > General tab > Default Settings. (Page 10.2)
Duplex
This function is especially intended for two-sided originals. You can select
whether the machine sends the fax on one side or both sides of the paper.
Load the originals onto the DADF to use this function.
Press Fax > the Basic tab > Duplex. Use left/right arrows to toggle the
value.
• 1 Sided: Is for the originals that are printed on one side only.
• 2 Sided: Is for the originals that are printed on both sides.
Resolution
Changing the resolution setting affects the appearance of the received
document.
Press Fax > the Basic tab > Resolution. Use left/right arrows to toggle
the values.
• Standard: Usually recommended for originals with text. This
option will reduce the transmission time.
• Fine: Recommended for the originals containing with small
characters, thin lines, or text that was printed using a dot-matrix
printer.
• Super Fine: Recommended for originals containing with extremely
fine detail, this option is enabled only if the receiving machine also
supports a Super Fine resolution.
Note
For memory transmission, Super Fine mode is not available.
The resolution setting is automatically changed to Fine.
Original Type
You can set the original document type to enhance the quality of a
document being scanned.
Press Fax > the Image tab > Original Type. Select the appropriate
option on the screen and press OK.
• Text: For originals with text or line art.
• Text/Photo: For originals with both text and photographs together.
• Photo: For originals that are continuous tone photographs.
Darkness
You can select the degree of darkness of the original document.
Press Fax > the Image tab > Darkness. Press the right arrow to enhance
the darkness degree and press OK.
Erase Background
You can lighten, reduce or delete the dark backgrounds from scanned
colored paper or newspaper originals.
Press Fax > the Image tab > Erase Background. Press On to activate
this function and press OK.
Note
Erase Background is disabled if the Original Type is set to
Photo.
Color Mode
Press Fax > the Image tab > Color Mode. Select option and OK.
• Mono: Transmits a fax in black and white.
• Color: Transmits a fax in color.
Setting up a fax phonebook
Use this feature to store destination names, fax numbers and
transmission settings in your machine. There are two options, Individual
and Group.
• Individual: Stores up to 200 fax numbers. And the fax numbers which
are stored in Individual work as Speed No..
• Group: Makes groups when you frequently send the same document
to several destinations. You can store up to 100 group dial numbers.
Entries stored here will be available for selection within the sending list
on the Basic tab of Fax. Dialing Group can be also setup comprising
of many Individual entries.
The fax numbers, which are stored in Individual, work as Speed No..
Storing individual phone numbers (Speed No.)