Star Micronics LC-100+ - Manual (Page 50)

42 Optional Accessories
Now you can load paper into the hopper and use the Auto Sheet Feeder for
printing.
Important!
Keep the printer’s front cover and paper guide in a safe place in case you need
to use them again in the future. To remove the Automatic Sheet Feeder from the
printer, simply perform the above procedure in reverse.
Loading Paper
❏
If fanfold paper is already loaded in the printer, perform the paper parking
operation (page 13).
❏
Set the release lever to the cut-sheet position.
❏
Pull the Automatic Sheet Feeder’s paper loading lever towards the front of
the printer.
❏
Slide the left paper guide to the position you want.
Paper loading lever