Smeg CW400RSD - Manual (Page 4)

3
2 Technical characteristics
TECHNICAL CHARACTERISTICS
CW350B
CW350BS
CW350BSD
CW350
CW350S
CW350SD
CW400B
CW400BS
CW400BSD
CW400R
CW400RS
CW400RSD
Input voltage power V 230V/1 230V/1 230V/1 400V 3N ~
Frequency Hz 50 50 50 50
Max. absorbed power kW 2,9 2,9 2,9 4,8
Boiler resistance power kW 2,6 2,6 2,6 4,5
Tank resistance power kW 1,6 1,6 1,6 1,6
Wash pump power kW 0,3 0,3 0,3 0,3
Water supply pressure kPa (bar) 200-400 (2 ч 4) 200-400 (2 ч 4) 200-400 (2 ч 4) 200-400 (2 ч 4)
Water supply temperature °C 50°C – 60°C 50°C – 60°C 50°C – 60°C 50°C – 60°C
“S” versions Water supply
temperature (incorporated water-
softener)
°C 15°C – 30°C 15°C – 30°C 15°C – 30°C 15°C – 30°C
Water supply hardness °dF 7°dF-12°dF 7°dF-12°dF 7°dF-12°dF 7°dF-12°dF
Rinse cycle water consumption l 2,4 2,4 2,4 3,5
Boiler capacity l 2,7 2,7 3,9 5,5
Tank capacity l 10 10 14 35
Standard cycle duration with
water supply at 50°C
s 120/180 120/180 120/180 60/120/180/C
Noise level dB(A) 56 56 56 56
Protection rating IPX 4 4 4 4
Net weight kg 31 37 44 53
Power cable type ◄HAR► H05VV-F H05VV-F H05VV-F H07RN-F
NOTE: “D” = versions with integrated detergent metering unit – “S” versions with integrated
water-softener
3 Installation and positioning
INSTALLATION and POSITIONING
Bring the dishwasher to its installation location, remove its packaging and verify the integrity of the apparatus
and of the components. If damaged, written notification must be sent to the transporter.
The packaging elements (plastic bags, polystyrene foam, nails, etc) must not be left within reach of children
and domestic animals as they are a potential source of danger.
All of the materials used for packaging are compatible with the environment. They may be safely preserved, or
may be disposed of at an appropriate waste disposal facility.
The components in plastic material subject to eventual disposal through recycling are marked in the following
manner:
PE polyethylene: external wrapping, instructions bag, protection bags.
PP polypropylene: bands.
PS polystyrene foam: protective corners, packaging cover.