Sanyo CE52LH1R - Manual (Page 7)

7
1. The LCD display has a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched
off but is still receiving mains power.
● To turn the monitor into standby mode, press the 4 4 button.
The blue power indicator illuminates more brightly.
● To turn the monitor ON from standby mode, press the 4 4
button again.
2. Control buttons (bottom corner of back cover)
Menu button: Used to display or cancel main menu.
Input/
d
button: Switch between AV1, AV2, AV3, PC or DVI
mode.
1
or
2
buttons: provide up and down adjustments.
4 button:
To switch to standby mode (to switch off completely
disconnect the monitor from the power supply).
Many of your monitors functions are controlled through the menu
function, using the remote control.
During menu operation the bottom of the on screen display will show
which controls can be used for menu navigation.
Press the
MENU button to enter the main menu. Whenever main
menu is accessed initially, PICTURE will be the defaulf selection.
A sub menu is selected using the 5 or 6 button and pressing
the 1 or 2 button when the required sub menu is highlighted.
When you have finished you can press the BACK button to return to
the previous menu, press the MENU button to exit the menu
operation.
1. Press the MENU button. PICTURE will be the default selection.
Press the 1 or 2 button to enter.
Set the picture settings for your “ personal” preference.
2. Use the 5 or 6 button to select eg. Brightness and the 1
or 2 button to adjust levels.
■
White Tone
May be used to adjust the color tone of the picture. Use the 5 or
6 button to select White Tone and press the 1 or 2
button to enter the sub menu. You can select Personal, Cool,
Standard or Warm settings by using the 1 or 2 button. To
adjust the color tone of the picture by using the 5 or 6
button to
select Red(R), Green(G) or Blue(B) and the 1 or 2 button
to adjust levels. These settings will be stored in personal mode
automatically.
Controls and Menus
INST INST ALLA ALLA TION TION
2 1
GB GB
Picture menu
Timer
AV 2 Video / S-Video
Alarm Timer ON / OFF
MENU
Picture Brightness
Contrast
Color
Tint (only if NTSC equipment is detected)
Sharpness
White Tone
White Tone / R / G / B
Advanced Setting DCDi / ACC/ACM / CCS / DNR / MPEG NR / Film Mode
Sound Treble
Bass
Balance
Bass Expander On / Off
Timer
Setup
PC Adj.
Current Time
Off Time
On Time
On Position
AV1 / AV2 / AV3 / PC / DVI
Menu Setup
PIP / POP Setup
Initial Settings
Text Language
Tile Mode
AV2 Setting
Western / Eastern / Russian / Arabic / Farsi
Tile Mode Active / H/V_Sets / H/V Location / Bezel H/V Adjustment
RGBHV / YPbPr
Auto Adjust
H-Position
V-Position
Clock
Phase
Language / H/V-Position / Duration / Transparence
PIP/POP Mode / Main/Sub Source / PIP Position
60
60
Menu Operation
If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.
60