Sony KP-53SV75A - Manual (Page 30)

– 30 –
KP-43T75A/53SV75A
RM-Y906 RM-Y906
TV
2
5
8
0
1
4
7
3
6
9
ENTER JUMP
GUIDE INDEX
RESET MENU
CODE SET
VOL CH
POWER MUTING
FREEZE
AUDIO
ANT TV/VIDEO
DISPLAY MTS/SAP CC
PICTURE
MODE
POSITION ACTIVE
SWAP PIP TV/VTR
SYSTEM
OFF DVD/VTR SAT/CABLE TV
DVD/
VTR
SAT/
CABLE
FUNCTION
SLEEP
m N M
x z X
TV
3-9. ELECTRICAL ADJUSTMENT BY REMOTE
COMMANDER
3. The SCREEN displays the item being adjusted.
4. Press
1 or 4 on the Remote Commander to select the
adjustment item.
5. Press
3 or 6 on the Remote Commander to change the data.
6. Press
2 or 5 on the Remote Commander to select the
category.
Every time you press 2(Category up), Service mode changes
in the order as shown below.
2. MEMORY WRITE CONFIRMATION METHOD
1. After adjustment, remove the plug from AC outlet, and then
replace the plug in AC outlet again.
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again and confirm they were adjusted.
By using Remote Commander (RM-Y906),all circuit adjustments
can be made.
NOTE : Test Equipment Required.
1. Pattern Generator (with component outputs)
2. Frequency counter
3. Digital multimeter
4. Audio oscillator
1. METHOD OF SETTING THE SERVICE ADJUSTMENT MODE
SERVICE MODE PROCEDURE
1. Standby mode. (Power off)
2. DISPLAY n 5 n VOL (+) n TV POWER
on the Remote Commander.
(Press each button within a second.)
SERVICE MODE ADJUSTMENT
3. ADJUSTING BUTTONS AND INDICATOR
Note : When the PJE mode is activated, which displays an
internally generated signal, several buttons on the remote
commander will have different functions than listed
above. Therefore, when in the PJE mode, refer to page 9
for button functions.
7. If you want to recover the latest values press
- then [ENTER] to
read the memory.
8. Press [MUTING] then [ENTER] to write into memory.
9. Turn power off.
Note: Press
8 then [ENTER] on the Remote Commander to initialize
or turn set off and on to exit.
MUTING
RM-Y906
Category up
Data up
Data down
Category down
Adjustment item up
Adjustment item down
VOL (+)
Category Adjustment item
DATA
(SCREEN DISPLAY)
SERVICE VP50 00 VPOS 040
000000 00
VP50
VP60
VPTR
VPTV
VPTS
PJE
COM
TONE
SC
IC
DAC
PI
ID
CCD
OP
ENTER
DISPLAY
TV POWER ON