Sprint Nextel U727 - Manual (Page 34)

26 Section 2A: Installing the Sprint Mobile Broadband USB Modem
How to Insert and Use the microSD
Memory Card
It is recommended that you completely exit Sprint Mobile
Broadband and remove the device from your computer before
your insert the microSD Memory Card.
To Insert a microSD Card
1. Locate the microSD port on your device (shown below).
2. Line up the the microSD card with the port.
3. Gently push in the microSD card until it clicks into place.
To Eject a microSD Card
1. Follow the instructions for proper removal of your
device on page 33.
2. Gently push in the microSD card and it will pop half way
out of the slot.
3. Once partially visible, you may pull the microSD card
out of the slot and store in a dry, safe place.
Caution: Do not remove or attempt to remove the microSD card
while the device is still in the computer, as this may
damage the card and the device.