Sprint Nextel U727 - Manual (Page 99)

Section 2C: Menu Options 91
Sprint Mobile Broadband Settings
To customize your Sprint Mobile Broadband - Novatel Wireless
settings, select Menu > Settings > Sprint (connection name), and then
select from the following menu options:
ⅷ Always Show Welcome Screen – Select this check box if you
would like to have a welcome screen appear upon a successful
connection to the network.
ⅷ Go Automatically When Ready – Select this check box to have
Sprint Mobile Broadband automatically connect to the
network when you insert your device.
ⅷ Enable Network Adapter (NDIS) – Allows you to establish a
Novatel Wireless (1xEV-DO) connection to connect to the
network automatically without launching Sprint Mobile
Broadband. You can disable the Enable Network Adapter mode
at any time by deselecting the Enable Network Adapter (NDIS)
check box from this menu. (See below for more information
about enabling NDIS.)
ⅷ Enable LED on Device – Your Sprint Mobile Broadband device,
has two LED lights located near the antenna of the device.
Select Enable LED on Device to turn on the LED feature.
Novatel Wireless Network Adapter (NDIS)
Enabling the Novatel Wireless Network Adapter enables always-on
connectivity much like an Ethernet card and eliminates the need to use
Sprint Mobile Broadband. As soon as the USB connector is inserted into
your USB port, the device connects to the network automatically. The
connection is also reestablished when your computer comes out of
hibernate and standby modes.