Swann NIGHTHAWK 3-Feb - Manual

B Connecting the receiver to record on a VCR
LINE IN
LINE OUT
VIDEO AUDIO
VCR
TV
Video
INPUTS
Video
OUTPUT
1 3
Component
INPUTS
1 2
RECEIVER
Connect the A/V cable
from the receiver to
the VCR
D.
Plug the power supply
into the receiver
B.
C.
Connect an A/V cable
from the Line OUTPUT
on the back of the VCR
Connect the A/V cable
to the INPUT on the
back of the TV
D Viewing the cameras and recording to VCR
Power on the Receiver,
VCR and TV Using your TV’s remote
control tune your TV to
the correct INPUT*. In our
example above the TV
should be set to INPUT
1
Using your VCR’s remote
control tune your VCR to
the LINE
1 INPUT*
You should now see
your cameras on the
TV screen. Follow
your manufacturer’s
instructions to
record to your VCR 1. 2. 3. 4.
*Some VCR’s and TV’s will list this as INPUT, A/V, SOURCE, L1, Channel 0 - Consult your manufacturer’s manual for more information
1. Connect the AV cable to the back of the Receiver
2. Connect the AV cable to an available Video INPUT on TV
3. Tune TV to the correct INPUT* using TV remote
Connecting the receiver to your TV
Back of TV
Back of Receiver
C
1 3
INPUTS
Package Contents A
2 or 3 NightHawk
Cameras
Packaging
Receiver
Remote Control
Hardware
AV Cable
Quick Start Manual
Camera Power
Supplies
Receiver Power
Supply
Nighthawk 2/3 Camera Kit Easy Setup Guide
www.swannsecurity.com
6ZDQQ&RPPXQLFDWLRQV‡7ROO)UHH7HFKQLFDO6XSSRUW 86$1 877 274 3695$XVWUDOLD1300 13 8324‡(PDLO [email protected]