Sony DVP-FX1 - Manual (Page 55)

Using Various Functions with the Control Menu 55
Notes
• Depending on the DVD, you may not be able to change the languages even if
multilingual tracks are recorded on the DVD.
• While playing the CD/VIDEO CD, standard stereo playback will be resumed when:
– you open the lid
– you turn the power off
• While playing the DVD, the sound may be changed when:
– you open the lid
– you change the title
– you disconnect the AC power adaptor
– you detach the battery pack
Displaying the audio information of the disc
When you select “AUDIO,” the
channels being played are
displayed on the screen.
For example, in Dolby Digital
format, multiple signals
ranging from monaural to 5.1
channel signals can be recorded
on a DVD. Depending on the
DVD, the number of the
recorded channels may be
different.
* “PCM,“ “DTS,” “DOLBY DIGITAL“ or “MPEG“ is displayed. In case of “DOLBY
DIGITAL,” the channels in the playing track are displayed by numbers as follows:
For Dolby Digital 5.1 ch:
** The letters in the program format display mean the following:
L: Front (left)
R: Front (right)
C: Center (monaural)
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural) – the rear component of the Dolby Surround
processed stereo signal and the Dolby Digital signal.
LFE: – LFE (Low Frequency Effect)
Current
audio
format*
Current
playing
program
format**
DVD
AUDIO
1: ENGLISH
1 8 ( 3 4 )
1 2 ( 2 7 )
C 0 1 : 3 2 : 5 5
L R C
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
Select: ENTER
Front component 2
+ Center component 1
Rear component 2
LFE (Low Frequency Effect)
component 1
DOLBY DIGITAL 3 / 2 . 1
continued