Spectra KT2038 - Manual (Page 11)

SKIP & SEARCH FUNCTIONS
Locating a Particular track
Locating a Particular Point in a track
Note: Low level audio will be heard during the search process to assist in
locating correct point in the track.
“ESP” ANTI-SKIP PROTECTION
This player incorporates the latest digital anti-skip circuit, which prevents interruption
of the sound output if the unit is subjected to shock or vibration during disc playback.
The anti-skip system will automatically be activated when a disc is played and will
show the ESP in the display. The ESP icon will flash rapidly while the data buffer fills
and then steadily when it is full.
The sound will mute for approximately 1 second while the buffer fills. Once full, the
buffer will give approximately 60 seconds of protection against interruption of sound
output. If the player is subjected to shock or rolling for longer than the buffer memory,
some interruption of sound output will occur. This is normal and to be expected and
the sound will resume once the player has stabilized from the shock or rolling
disturbance.
NOTE:
• To turn off this function, press the ESP button.
• While the “ESP” Anti-skip function provides for continuous sound output when
the unit is subjected to shock or vibration. It will not compensate for errors
arising from the use of defective, scratched or dirty discs.
• When using the “ESP” Anti-skip function the battery power consumption
increases due to the faster disc rotation and the active dynamic memory.
• When powering the unit solely from batteries, you are advised to use the “ESP”
Anti-skip system only when necessary to preserve battery life.
To skip back to the beginning of the
current or a previous track
Press or repeatedly.
To skip to the beginning of following
tracks
Press or repeatedly.
To search back at a high speed
Press & hold
To search forward at a high speed Press & hold
11