Smooth Fitness CE-8.0LC User Manual

Page 6

Advertising
background image

6

A

SSEMBLY

I

NSTRUCTIONS





S

TEP

4

Upright Sleeve Assembly

CAUTION: Be careful not to damage the Middle Connection Wire (109) while assembling Step 4 to 6.

Slide the Upright Sleeve (22) onto the Upright Post (4).

Refer to the drawing above. Make sure the direction of the Upright Sleeve (22) is in the correct position.

S

TEP

5

Upright Post Assembly

a. Check that 2 x Nylon lock Nuts (M10x8t) (103) have preassembled into the front of the Main Frame (1) as FIG1

illustration shows on the top right corner, making sure that the slotted bracket of the upright post slides between the

nuts and the frame.

b. Insert the Upright Post (4) onto the Main Frame (1) and slightly secure with the 2 x Hex Head

Bolts (M10xp1.5x50mm) (95) by using the T-Handle SOCKET WRENCH(17mm) as shown.

NOTE: Please do not fully tighten Bolts (95) or lock nuts (103) until Step. 7 has

been COMPLETED

S

TEP

6

Wire Assembly

Plug the Middle Connection Wire (109) into the Lower Connection Wire (110).

NOTE: Please do not fully

tighten Bolts (95) until Step. 8

for the easy assembly

NOTE: Do not remove the lock

nuts (103) during assembly

Advertising