Sealife DC300/DC310 - Manual (Page 33)

34
Setting DPOF
DPOF allows you to embed printing information on your memory card. By
using DPOF, you can select an image to be printed and then specify how many
prints you would like. Take your memory card to a DPOF enabled printer that
accepts SD memory cards. The DPOF/card-compatible printer will read the
embedded information on the memory card and print your images as specified.
To set DPOF:
1. Turn the mode dial to mode and
power on the camera.
2. Press the button. Select DPOF by
using the / button.
3. Press the button. Select the option
you prefer by using the / button.
4. Press the button. Make the setting
by pressing the / button and then
press OK.
■ The DPOF icon will appear on the DPOFsetimage.
The DPOF menu options:
[Quantity] : sets image quantity from 0~9
Deleting images/video clips
To delete one image/video clip at a time, use the button on the rear side of the
camera. To delete all images/video clips at once, go to Delete all in the Playback
menu.
To delete one image/video clip at a time:
1. Turn the mode dial to mode and power
on the camera.
2. Select unwanted image/video clip by using
the / button and then press the
button.
3. When delete message appears, select [Yes]
by using the / button and then press OK.
■ The next image/video clip appears.
■ If you want to cancel the deletion, select [No].
4. Continue the deletion if necessary. If all images are deleted, [ “No image” ]
will pop up. To exit this screen, turn the mode dial to the other mode.