Sealife DC300/DC310 - Manual (Page 35)

36
MOVIE MODE
Recording video clips
The movie mode allows you to record video clips at
the resolution of 320 x 240 pixels.
1. Open the lens cover, turn the mode dial to the
mode, and power on the camera.
■ The recordable movie time displays on the
status LCD and the LCD monitor.
2. You can start recording a video clip by pressing
the shutter button.
■ The elapsed time displays on the LCD monitor while recording a
video clip.
■ To stop recording, press the shutter button again.
• In movie mode, resolution/quality, macro, self-timer cannot be set or
activated.
• In movie mode, the flash mode is automatically set to [OFF].
If the “low light” message appears on the LCD, use a video light or move to
a brighter environment.