Sunbeam PB7600 - Manual (Page 8)

6
1. Place the blender jug onto the motor base.
Note: Do not switch ‘ON’ the MultiBlender
Pro without the lid in position.
2. Place ingredients into the glass jug. Do
not exceed the maximum indicated level –
1.5 litres.
3. Position the lid with ingredient cup onto
the blender jug. Ensure the lid is firmly in
place.
4. Using the selector dial, select the desired
blending speed 1, 2, 3 or PULSE.
Settings 1, 2, 3 will provide continuous
blending until the dial is turned to the ‘O’
position.
The Blending Guide on page 8 shows the
functions that can be performed and the
suggested speeds to use.
Note: Although the lid fits firmly to the
glass jug, we advise when blending liquid
ingredients, to place your hand on the lid
as you initially select the blending
speed/function. As the powerfull 600 watt
motor could cause the liquid to surge up
causing leakage. Once you have started
blending you can remove your hand.
Note: Do not operated for more than 4
minutes at a time.
Further ingredients can also be added
whilst blending by removing the ingredient
cup and pouring ingredients through the
hole in the lid.
5. After you have completed blending, turn
the control dial to the ‘0’ position.
Note: When removing the six-blade
assembly from the glass jug you may need
to slightly tilt the blade so that it slides
out easily. You shouldn’t force the blades
out of the glass jug as this will ultimately
damage the blades.
Using your MultiBlender Pro