Samsung HT-DB390 - Manual (Page 13)

23
Disc Playback
• Depending on the content of the disc, the initial screen may appear different.
• To resume playback, press PLAY/PAUSE ( )
button again.
1
Press OPEN/CLOSE button to open
the disc tray.
2 Load a disc.
• Place a disc gently into the tray with the disc’s label
facing up.
3
Press OPEN/CLOSE button
to close the disc tray.
To temporarily pause playback,
press
PLAY/PAUSE during playback.
DVD VCD CD
• Playback starts automatically.
• If pressed once, “ PRESS PLAY ” is displayed and the
stop position will be stored in memory.
If
PLAY/PAUSE ( ) button or ENTER button is
pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, “ STOP ” is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback
starts from the beginning.
To stop playback,
press
STOP during playback.
Note
• Depending on the recording mode, some MP3-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
Note
MP3-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3 format can be played.
2
In Stop mode, use
to select
the album, and
then press the
ENTER button.
• The MP3 menu screen will appear
and playback will start.
• Depending on the MP3 disc, the
appearance of the menu may be
different.
1
Press the
OPEN/CLOSE
button to open the
disc tray, and then
load the MP3 disc.
4
Press the STOP
button to stop
playback.
• To select another album and track,
repeat Steps 2 and 3 above.
3
To change the album,
use to
select another album
in Stop mode, and
then press the
ENTER button.
24
OPERA
TION