Sharp MD-MT180H - Manual (Page 16)

01/10/11 180H_E_3.fm
E-15
MD-MT180H
ENGLISH
B
asic Opera
ti
o
n
-Pla
y
b
a
c
k
/Hold F
unc
ti
on-
Playback (continued)

Bass control
Each time the BASS button is pressed, the tone will be
switched as follows.
Notes:

You cannot change the bass setting whilst selecting
menus.

Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your
usual expectations of noise, high volume may damage
your hearing.

The sound escaping from your earphones may annoy
people around you. In particularly crowded places
(such as on trains or buses), reduce the volume.
Hold Function
The present operation condition can be kept even if other
buttons are accidentally pressed in a place such as a
crowded train.
Press the HOLD button for 2 seconds or more.
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
BASS 1 Emphasised slightly.
BASS 2 Emphasised more.
BASS 3 Emphasised fully.
BASS OFF Cancelled.
Hold Release
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.