Sunbeam 1637 - Manual (Page 7)

 7
i
mporTanT
i
nformaTion
1. If the Hair Dryer has been accidentally immersed in water, contact your nearest
authorized SUNbeAm ® distributor. DO NOT ATTemPT TO USe THe HAIR DRYeR
AGAIN.
2. If the ReSeT button pops out during use and the Hair Dryer stops working, this may
indicate a malfunction. Allow the Hair Dryer to cool before pressing ReSeT button
and try again. If ReSeT button pops out again, contact your nearest authorized
SUNbeAm ® distributor.
3. If the Hair Dryer does not function as described in the test procedure above, contact
your nearest authorized SUNbeAm ® distributor.
m
ainTenance
, c
are
and
c
leaning
Your Dryer requires no special maintenance or servicing. No lubrication is needed.
Repairs, when necessary, must be performed by a recognized service facility. For proper
operating performance, the DRYeR mUST be KePT CLeAN. blocked or clogged air intake
openings will cause the Dryer to overheat.
1. Always unplug Dryer from outlet when Dryer is not in use or when cleaning it.
2. To clean the exterior surface and attachments, wipe with a slightly damp cloth.
3. Handle the cord carefully to prevent twisting, pulling or jerking that will damage it.
4. To store or pack Dryer, let it cool to room temperature. DO NOT WRAP THe CORD
AROUND THe DRYeR. Coil cord loosely or tie in large loops with a twist tie.