Samsung SVR-440 - Manual (Page 38)

38
recording is indicated.
. RECORD STATUS [ON/OFF]: With Record Status [ON], the recording status “S” is displayed on
the corner of the screen during recording.
. TITLE DISPLAY [ON/OFF]: With Titles Display [ON], the titles of [CH1 ~ 4] set on the Channel
Title submenu by uses are displayed on the live screens.
. EVENT DISPLAY [ON/OFF]: With Event Display [ON], the event information is displayed when
event is occurred.
. OSD CONTRAST : Set the contrast for Menu OSD. Number of % is higher, the OSD is Darker.
4.5 RECORD SETUP
Press the MENU button and select the Tab using the Left/Right button. Then, the submenu related to
recording appears as illustrated below. Press button and select the submenu by using the
Left/Right button. Next, press button again, and you can select setup items using the Up/Down
button.
4.5.1 REPEAT RECORD
Monitoring screens can be recorded on the HDD and the storage capacities vary on HDD types
installed on the unit.
. REPEAT RECORD [ON/OFF]: Set whether to repeat recording.
. ON: If no storage spaces are left on the HDD, recording is continued by overwriting the oldest
data.
. OFF: If no storage spaces are left on the HDD, recording is stopped.
. WARNING MESSAGE: When the remaining capacity of the HDD reaches the predefined
percentage, a warning message is displayed to users. The warning level can be set from
1 to 10%, 5 ~10% in general.
. WARNING BEEP: When the remaining capacity of the HDD reaches the predefined percentage, a
warning beep is activated.