Installing the expressmodule, To install the expressmodule with the power off – Sun Microsystems 5945532 User Manual
Page 34
16
Sun Dual 10GbE SFP+ PCIe ExpressModule User’s Guide • August 2008
Installing the ExpressModule
The following instructions describe the basic tasks required to install the
ExpressModule. Refer to your system installation or service manual for detailed
ExpressModule installation instructions.
Note –
To maintain proper cooling for the ExpressModule in your chassis, all
ExpressModule slots must be filled with either operating ExpressModules or filler
panels.
▼
To Install the ExpressModule With the Power
Off
1. Halt and power off your system.
2. Power off all peripherals connected to your system.
3. Attach the adhesive copper strip of the antistatic wrist strap to the metal casing
of the power supply. Wrap the other end twice around your wrist, with the
adhesive side against your skin.
4. Remove the filler panel from the ExpressModule opening.
5. Open the latch on the ExpressModule.