Samsung SINGLE LINE TELEPHONE - Manual (Page 15)

7
TRANSFERRING CALLS
Transfer is used to send any call to another extension in one of two ways. You can perform
a ‘screened’ transfer by informing the other extension who is calling or you can perform a
blind (‘unscreened’) transfer without notification.
1. Press Recall to receive transfer dial tone and then dial an extension number. Your
call is automatically put on transfer hold.
2. Hang up when you hear ringing—OR—wait for the party to answer and advise
the party of the call and then hang up. If the transfer is refused, you will be re-
connected to the external line when the station hangs up or you can press Recall
to reconnect to the external line.
NOTE: After the inside party answers, you may toggle any number of times between the two parties
by pressing Recall. When talking to one party, the other party cannot hear you.
TRANSFER WITH CAMP-ON
When you want to transfer a call to another station but it is busy, you may camp the call on
to this station:
1. Press Recall to receive transfer dial tone and then dial an extension number. Your
call is automatically put on transfer hold.
2. Hang up when you hear busy tone. The called party will be alerted that a call is
waiting.
TRANSFER RECALL
All unscreened transfer calls and camped-on calls sent from your station will automatically
recall to you if they are not answered by the destination station within a preprogrammed
time.
When your phone rings, lift the handset to answer the recall. If you do not answer this re-
call within a preprogrammed time, it will go to the system operator.
CALL WAITING
If an external call has been camped-on to your phone or another station is camped-on to
your station, you will receive a camp-on tone indicating another call is waiting.
1. Press Recall and dial 11 to put the first call on hold.
2. Hang up and the waiting call will ring.
3. Lift the handset to answer.
4. Complete this call by transferring it or hanging up.
5. Lift the handset and dial 11 to return to your first call.