Smeg SW Range - Manual (Page 6)

6
GB
Setting up
It is important that the appliance be
absolutely level. To level the appliance,
remove the kick plate below the door and
screw the adjustable feet up or down (figs
8-9). If necessary, it is possible to adjust the
back feet before the upright is installed. Use
a spirit level to check that the appliance is
absolutely level.
If the appliance is to be placed on a soft
surface, e.g. floorboards or a carpet, it is
best to recheck whether the appliance is still
level after a period of time as the underlying
surface may give under the weight of the
appliance.
fig. 8
fig. 9
Do not tilt the upright more than 7 degrees
to avoid damaging the floor.
>7º
<7º
fig. 10
fig. 11