Smeg SW Range - Manual (Page 8)

8
GB
The appliance is intended for connection
to alternating current. The required volt-
age (V) and frequency (Hz) are stated on
the nameplate inside the appliance. Power
must be connected via an independent wall
socket outlet.
Technical data
This appliance complies with CE marking
regulations, directives and standards.
Low Voltage Directive 73/23/EEC.
EMC Directive 89/336/EEC.
Council Directive 92/75/EEC on the en-
ergy labelling of household appliances as
subsequently amended by 94/2/EC and
2003/66/EC.
Directive 96/57/EC on energy efficiency re-
quirements, and subsequent amendments.
Electrical connection