Sanyo DSR-M800 User Manual
Page 26
1
25
LANGUAGE/CLOCK SET
You can set the date/time at which the time is switched from
standard time to daylight savings time, and the date/time at
which the time is switched back again.
The example below is the default value.
Example:
After the clock display reaches April 6, 2003,
01:59, the next clock display is 03:00, putting the
clock an hour ahead (daylight savings time).
After the clock display reaches October 26, 2003,
01:59, the next clock display is 01:00, putting the
clock an hour behind (back to standard time).
(1) Sets the week for switching to daylight savings time.
(2) Sets the month.
(3) Sets the time.
(4) Sets the week for ending daylight savings time.
(5) Sets the month.
(6) Sets the time.
7
Press the [
] button.
The cursor moves to “1ST”.
8
Press the [
] and [
] buttons to select
the desired week, then press the [
]
button.
The cursor moves to “MONTH”.
9
Press the [
] and [
] buttons to select
the desired month, then press the
[
] button.
The cursor moves to “TIME”.
10
Press the [
] and [
] buttons to select
the desired time, then press the [
]
button.
The cursor moves to the minutes portion of the time.
Set the desired minutes in the same manner.
The <DAYLIGHT SAVING> settings are now finished.
This section describes how to have the time synchronized
automatically when two or more digital video recorders are
connected. If you set the <EXT.CLOCK SET> time to 5:00,
all the connected devices are synchronized to the same
time (to the nearest second) every day at 5:00.
(Default setting: 01:00)
1
Use a cable to connect the CLOCK ADJ
terminal on the rear panel of one digital
video recorder to the CLOCK ADJ
terminal on the second digital video
recorder.
2
Press the [
] or [
] button to move
the cursor to “ADJUST TIME”.
3
Press the [
] button.
“01” flashes.
4
Press the [
] or [
] button to select
the desired time, then press the [
]
button.
(Example: 05:00)
When “USE” is selected for “MODE” under
<DAYLIGHT SAVING>.
(1)
(2)
(3)
(4)
(5)
(6)
<EXT.CLOCK SET> settings
1st DVR
2nd DVR
To 3rd DVR
e_dsr_m800.book Page 25 Friday, January 31, 2003 5:45 PM