Sanyo DSR-M800 - Manual (Page 8)

7
2
NAMES AND FUNCTIONS OF PARTS
Front panel
1. POWER indicator
Lights when the power is ON.
Flashes when there is a problem with the hard disk or
fan. (JP.10)
2. [TIMER] button and indicator (JP.14)
When the button is pressed while recording or stopped,
the digital video recorder enters timer record standby,
and the indicator lights. When the set time arrives, the
digital video recorder starts timer recording.
3. [SEARCH] button and indicator (JP.18)
When the button is pressed while recording or stopped,
the indicator lights, and the search setting screen
appears.
4. [MENU] button
Used to display the menu screens (setting screens).
The indicator lights when a menu screen is displayed.
5. [REVIEW] button
When pressed during playback, lets you rewind the
image while watching it on screen. Also used for menu
screen operations.
6. [ ] button
Used to move the cursor in menu screens up. Also used
to change setting values.
7. [ ] button
Used to move the cursor in menu screens down. Also
used to change setting values.
8. [CUE] button
When pressed during playback, lets you fast-forward
the image while watching it on screen. Also used for
menu screen operations.
9. [EXIT/OSD] button
Returns to the normal screen when the main menu or a
sub-menu is displayed.
10. [PLAY/STOP] button
Plays back the normal image (indicator lights). When
pressed during playback, stops playback.
11. ALARM indicator
Flashes when recording an alarm image.
12. [REC/STOP] button and indicator
Starts normal recording. Indicator lights during
recording.
During recording, pressing the button for at least 3
seconds stops recording and turns off the indicator.
13. FULL indicator (JP.14)
Lights when the remaining memory in the hard disk’s
recording area has reached zero and recording has
stopped.
14. LAN indicator
Lights when the digital video recorder is connected to a
network. Flashes when data is being sent and received.
15. [MENU RESET] button (JP.22)
Used to initialize the currently displayed menu settings,
and to set the time.
16. [STILL] button
When pressed during playback, freezes the screen
image (the indicator lights). Pressing the button again
resumes playback.
17. USB terminal (JP.40)
Used to connect a CompactFlash memory card reader.
18. LOCK/REMOTE indicator (JP.21, P.34)
Lights when operations have been locked by the key
lock or security lock setting.
If an operation button is pressed when the security lock
is set, a buzzer sounds. The key lock cannot be set
during playback.
The indicator flashes at 1Hz when there is a network
connection, and flashes at 4Hz when there is a network
connection while locked.
ALARM
REC/STOP
LOCK/REMOTE
USB
POWER
SEARCH
MENU RESET
MENU REVIEW CUE EXIT/OSD
PLAY/
STOP
STILL
TIMER
FULL
LAN
(LINK/ACT.)
1 3 2 5 6 7 8 9 11 12
13 14 15 17 16 18
4 10
e_dsr_m800.book Page 7 Friday, January 31, 2003 5:45 PM