Snapper 020230 - Manual (Page 5)

2650 PSI Pressure Washer
5
KNOW YOUR PRESSURE WASHER
Read this user’s manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Chemical Injection
Siphon/Filter
Spray Gun
Air Filter
Fuel Tank
Pump equipped with
Automatic Cool Down System
Oil Fill Cap/Dipstick
High Pressure Outlet
& Water Inlet
Air Filter — Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F.Warm water will
discharge from pump onto ground.This system prevents
internal pump damage.
Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke Knob — Prepares a cold engine for starting.
Fuel Tank — Fill tank with regular unleaded fuel. Always leave
room for fuel expansion.
High Pressure Hose — Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet — To connect high pressure hose.
Nozzle Extension with Quick Connect — Allows you to
switch between four different spray tips.
Oil Fill Cap/Dipstick — Check and fill engine with oil here.
Pump — Develops high pressure.
Recoil Starter — Use for starting the engine manually.
Safety Goggles (not shown) — Always use the enclosed
goggles or other eye protection when running your
pressure washer.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
Spray Tips — Chemical injection, 0°, 15°, and 40°: for various
high pressure cleaning applications.
Throttle Lever—Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connect garden hose here.
High Pressure Hose Spray Tips
Nozzle Extension with
Quick Connect
Choke Knob
Throttle Lever
Recoil Starter