Snom M3 - Manual (Page 22)

english
© snom technology AG 2007 •
22
2) Choose voip settings, and then press the
ok key.
3) When prompted for a Pin code, type the
default Pin code 0000, and then press the
ok
key.
3) Choose Accounts.
You then enter the data for the siP account.
1) Choose the appropriate siP account and fill in
the user data.
2) if you have more than one siP account, then
you need to enter the account setting s for
each account.
3) Choose the listed parameters one by one,
press the ok key.
• Display name (optional) – Caller iD that the
called party sees
• User name – usually the phone number you
received from your service provider
• Authentication name – usually the same as
User name
• Password – the password you received
from your siP provider
• Account name – name of the account used
in Call Groups
• registrar – iP or Dns address of the siP
server
• outbound Proxy – iP or Dns address of
the outbound Proxy
4) After each change, press the ok key and
then the Yes soft key when prompted to save
changes.