Snom M3 - Manual (Page 24)

english
© snom technology AG 2007 •
24
hoW to chAnge Access code
the access code is used for calculating encryp-
tion keys during the intitial pairing of handsets to
the gateway. to ensure privacy, the access code
must be changed. handset and gateway access
codes must be the same.
When registering a new handset, ensure that its
access code is modified to the same value as the
access code of the gateway.
1) enter settings, system settings.
2) When prompted for a Pin code, type the Pin
code (default: 0000), and then press the ok.
3) Choose Access code.
4) Press ok.
5) Press gateway.
6) type in the new access code. Press ok and
press yes to save.
1) enter settings, system settings.
2) When prompted for a Pin code, type the Pin
code (default: 0000), and then press the ok.
3) Choose Access code.
4) Press ok.
5) Press handset.
6) type in the new access code. Press ok and
press yes to save.