Limits of liability and iso 9001 compliance – SUUNTO X9 User Manual
Page 34
34
18.3. CE
The CE mark is used to mark conformity with the European Union EMC directives 89/
336/EEC and 99/5/EEC.
18.4. Limits of Liability and ISO 9001 Compliance
If this product should fail due to defects in materials or workmanship, Suunto Oy
will, at its sole option, repair or replace it with new or rebuilt parts, free of charge,
for two (2) years from the date of its purchase. This warranty is extended only to
the original purchaser and only covers failures due to defects in materials and
workmanship that occur during normal use while in the period of the warranty. It
does not cover battery, battery replacement, damage or failures resulting in accident,
misuse, neglect, mishandling, alteration or modifications of the product, or any
failure caused by operation of the product outside the scope of its published
specifications, or any causes not covered by this warranty. There are no express
warranties except as listed above. The client can exercise the right to repair under
the warranty by contacting Suunto Oy’s Customer Service department to obtain a
repair authorization. Suunto Oy and its subsidiaries shall in no event be liable for
any incidental or consequential damages arising from the use of or inability to use
the product. Suunto Oy and its subsidiaries do not assume any responsibility for
losses or claims by third parties that may arise through the use of this device.