Sungale AW15S-B - Manual (Page 17)

Chapter 4
Editting & Settings
30
30
Editing
Copy file
Delete file
Settings
Language set
Picture set
Start up set
Video set
Default set
Version
32
33
33
34
36
37
37
38
PC Connecting
Connecting your DPF to your PC
Use the supplied USB cable to connect your DPF to your PC.
Note: Before connecting to your PC, first unplug the attached USB HOST CABLE from
the USB OTG jack.
1. After connecting your DPF to the PC, your PC should display a window similar to the
one shown below.
2. Choose "Open folder to view files..." and click "OK". Your PC will display the
contents of your memory.
3. With your DPF files on display, you may copy documents and move them to your
PC, delete items from your DPF's memory, or paste files on your PC into your DPF's
memory. Right click the desired items to find these options.
4. When you are finished managing your files, click the "Safely Remove Hardware"
icon on your toolbar and confirm the operation.
5. When your PC says you may remove your hardware, unplug the USB cable from
your PC, and resume use of your DPF.
Chapter 2 I Connection DPF 16