Sungale AW15S-B - Manual (Page 42)

Chapter 5 I Customer Management DPF 41
Question and Answer
4 Chapter 1 I introduction DPF
Safety Precautions
Power Related
WARNING: indicates information that, if neglected, could result in serious
injury and/or death to the user.
CAUTION: indicates information that, if neglected, could result injury to the
user and/or material damage.
01. Use only the power supply
included with your frame. Failure
to do so may result in product
malfunction. 02. When connecting to your power
source, make sure that your hands
and feet are free of moisture. Failure
to do so could result in electrical shock.
05. Do not overload power strips. 06. Disconnect the power supply
during inclemental weather
conditions including lightning
storms. Failure to do so may result
in fire.
03. Make sure the power supply is
firmly plugged in. A loose power
cord could result in shock, or fire. 04. Do not let the power cord get
tangled, and do not place heavy
objects on the cord. Putting stress
to the cord creates a fire hazard
and the possibility of electric shock.
Please read the following guidelines carefully to ensure user safety.
No. The PC must have a USB 2.0 or higher, and the PC must have
Windows 2000 or above.
Can I adjust the colors of the display?
Why can't my PC find the internal
memory?
Why won't the unit play pictures?
What MPEG-4 formats are supported
by the multimedia Digital Photo
Frame?
Why won't the frame play my music?
Why doesn't the photo cover the
entire screen?
Can the DPF connect with ALL
computers?
You can adjust the picture display in the video settings in the set up menu by
changin the brightness and contrast settings. This will not alter the contents
of your picture files.
Turn on the DPF and wait for the function menu to appear, then connect the
USB cable from the unit to PC. If the "Found New Hardware" prompt fails to
appear, look in "My Computer" for a USB mass storage device.
1. Ensure the pictures are stored in the card or USB drive, and that you
have the correct source selected.
2. Make sure all your image files are JPEG, JPG or BMP format.
3. If pictures still do not play, try reformatting your card or internal memory.
The player can support most AVI, DIVX and XVID video files.
The player can only play MP3 and WMA audio files (bit rate 32kbps- 192kbps).
The resolution required for a picture to cover the entire screen must be
greater than or equal to 1280x800 pixels (RGB).