Sony Ericsson TA-FA1200ES - Manual (Page 6)

6 GB
Using a bi-amplifier
connection
You can make a bi-amplifier connection by
connecting both the SPEAKERS A terminals
and SPEAKERS B terminals simultaneously.
When using a bi-amplifier connection, set
SPEAKERS (OFF/A/B/A+B) to A+B
(page 11).
To connect speakers
Connect the terminals on the Lo (or Hi) side of
the speakers to the SPEAKERS A terminals,
and connect the terminals on the Hi (or Lo)
side of the speakers to the SPEAKERS B
terminals. Make sure that metal fittings of Hi/
Lo attached to the speakers have been removed
from the speakers. Not doing so may cause a
malfunction of the amplifier.
Note
When you use the auto calibration function, make
the bi-amplifier settings before you perform auto
calibration.
Speaker
(L)
Speaker
(R)
Hi
Lo
Hi
Lo