About this document, 1 spectralink corporation model numbers, 2 referenced documents – SpectraLink 72-1065-01 User Manual
Page 5
SpectraLink Corporation
Quick Start Guide
NetLink Components
PN: 72-1065-01-B.doc
Page 5
1. About This Document
This document is a short guide to the installation, setup, and maintenance of the
SpectraLink NetLink Wireless Telephone System when utilized with a traditional
PBX or IP Telephony Server. It outlines the steps to install and configure the
NetLink Telephony Gateway, the NetLink SVP Server, and the NetLink Wireless
Telephones.
1.1 SpectraLink Corporation Model Numbers
This document covers the following registered model numbers:
TGA116, SVP100, SNP2400, RNP2400
1.2 Referenced Documents
SpectraLink 8000 Telephony Gateway: Administration Guide for SRP (1725-36028-001)
SpectraLink 8000 SVP Server: Administration Guide for SRP (1725-36032-001)
SpectraLink e340/h340/i640 Wireless Telephone Configuration and Administration Guide
(SRP)
(72-1065-09)
SpectraLink SVP Server: Administration Guide for Mitel and Cisco (1725-36031-001)
SpectraLink Wireless Telephone: Configuration and Administration
for Cisco CallManager/CallManagerExpress (72-1082-02)
for Mitel Networks 3300 and SX-200 ICP (72-1084-02)
SpectraLink 8002, e340/h340/i640 Wireless Telephone Configuration Cradle Administration
Guide (1725-36036-001)
Above documents are available at
Polycom WLAN Compatibility Table (1725-36040-001)
Access Point Configuration Guide (1725-36xxx-001 where xxx indicates a number
corresponding to the type of access point.)
Above documents are available at
LinkPlus Interface Guide (1725-361xx-001 where xx indicates a number corresponding
to the type of PBX), available at
Deploying Enterprise-Grade Wi-Fi Telephony white paper, available at