Samsung SF-5100 - Manual (Page 15)

1.6 Installation
3. Attach the handset cradle to the main body.
Insert the two tabs of the cradle into the slots on the left side of the
machine as shown, and while pressing part A on the bottom of the
cradle, push the cradle toward the machine until it clicks into place.
0 0 00000
0 0 000000000
0 0 000000 0 0 000000
0 0 000
0 0 00
0 000
0 000
0000
0000
0000
0
A
0 0 00000
0 0 000000000
0 0 000000 0 0 000000
0 0 000
0 0 00
0 000
0 000
0000
0000
0000
0
Note:
• There is a one-touch plate built under the handset cradle. You can use this plate
with the supplied one-touch label. Write information on the label to remind you
which number is stored in each position and attach the label on the plate.
To find the desired number, rotate the plate facing you and slide it under the
cradle when you are using the plate.
000000000
000000000
0 0 0000000
0 0 000000
0 0 000
0 000
0 000
0000
0
• If you want to remove the cradle, while pushing up the part A , on the bottom
of the cradle, slide the cradle down, then take it out.
02-Installation 12/10/99 6:28 AM Page 8