Samsung SF-5100 - Manual (Page 69)

5.6 Additional features
• Distinctive Ring Pattern Detection (DRPD)— “Distinctive ring” is a
telephone company service which enables a user to use a single tele-
phone line to answer several different telephone numbers. The particu-
lar number someone uses to call you on is identified by different ring-
ing patterns, which consist of various combinations of long and short
ringing sounds. This feature is often used by answering services who
answer telephones for many different clients and need to know which
number someone is calling in on to properly answer the phone.
Using the distinctive ring pattern detection feature, your fax machine
can “learn” the ring pattern you designate to be answered by the FAX
machine. Unless you change it, this ringing pattern will continue to be
recognised and answered as a FAX call, and all other ringing patterns
will be forwarded to the extension telephone or answering machine
plugged into the EXT. jack.
You can easily suspend or change distinctive ring pattern detection at
any time.
Before using the distinctive ring pattern detection option, distinctive
ring service must be installed on your telephone line by the telephone
company. To setup distinctive ring pattern detection, you will need
another telephone line at your location, or someone available to dial
your FAX number from outside.
Select ON to turn this feature on.
Select OFF to turn this feature off.
Select SET to setup or change the distinctive ring pattern detection.
The LCD displays [ WAITING RING ]. Call your fax number from
another telephone. It is not necessary to place the call from a fax
machine. When your machine begins to ring, do not answer the call.
The machine requires several rings to learn the pattern.
When the machine completes learning, the LCD displays ‘END DRPD
SETUP’.
With the distinctive ring pattern detection feature active, ‘distinctive
ring pattern detection’ appears in the display and the previously set
reception mode is ignored. If you turn off distinctive ring pattern
detection, the machine returns to any previously set reception mode.
Notes:
• Distinctive ring pattern detection must be set up again if you re-assign your
fax number, or connect the machine to another telephone line.
• After distinctive ring pattern detection has been set up, call your fax number
again to verify that the machine answers with a fax tone. Then have a call
placed to a different number assigned to that same line to be sure the call is
forwarded to the extension telephone or answering machine plugged into the
EXT. jack.
06-Additional 12/10/99 5:51 AM Page 8