Samsung SF-5100 - Manual (Page 31)

2.7 Getting started
Setting the time and date
The current time and date are shown on the display when the machine is
on and ready for use (standby mode). The time and date are printed on
all faxes you send.
Note: If power to the machine is cut off for over 30 minutes, when power
is restored, the machine prompts you to reset the time and date.
1. Press Setup. The display shows the first setup menu; FAX
NUMBER/NAME.
2. Press ➛!or ❿ until ‘TIME/DATE SETUP’ appears, then press
Start/Enter . The display asks you to choose a date format.
3. Press Start/Enter.
4. Press ➛!or ❿ until you find the desired date format, then press
Start/Enter .
If you select USA, the time and date appears in the order of month,
day, then year. The EUROPE format will be displayed in the order of
day, month, then year.
The display shows the currently set time and date using the selected
date format.
5. Enter the correct time and date using the number keypad.
Day = 01~31
Month = 01~12
Year = four digits
Hour = 00~23
Minute = 00~59
You can also use ➛ or ❿ to move the cursor under the digit you want
to correct, then enter a new number.
6. Press Start/Enter when the time and date on the display is correct.
If you enter an invalid number, the machine beeps and does not pro-
ceed to the next step. If this happens, just reenter the correct number.
The display shows the time and date you have set, then returns to
Standby mode.
06-25-1999 12:30 (‘USA’ type)
JUN-25 12:30 FAX
03-Getting Started 12/10/99 6:19 AM Page 8