Standard Horizon PHANTOM Series PS2000 - Manual (Page 50)

Phantom PS2000 Page 50
12.3 TIME OFFSET
This selection sets the time offset between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the [NAV] key.
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ TIME ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select time offset from UTC.
See illustration below to find your offset time from UTC. If
“
00 ” is assigned, the time is the same as UTC (Universal
Time Coordinated or GMT Greenwich Mean Time).
5. Press the [CALL(SET)MENU] key to store the time offset.
6. Press the [16/9] key to return to radio operation.
O
FFSET
T
IME
T
ABLE