Sunbeam 7659 - Manual (Page 2)

Do Read instructions carefully before using M o n i t o r
2. Do Rest arm on a flat surface so that upper arm is at heart level when
taking measurements.
3. Do Remain calm, quiet and still when measurements are being taken.
4. DO make sure that the cuff is in the proper position according to your
instruction manual.
5. DO Insure that the exhaust velocity is 2-5 mmHg per second at the systolic
point each time a measurement is taken.
6. DO Wait at least 10 minutes between taking measurements.
7. DO Pump unit pressure 30 to 60 mmHg above normal systolic before
beginning measurement.
8. DO Consult your physician before adjusting your medication based on
readings from this Monitor.
9. DO Use fresh alkaline batteries.
IO. DO Use a dry, soft cloth to clean the instrument.
2.
3.
4.
5.
6.
7.
8.
9.
10
DO NOT move arms or hands when measurement is being taken.
DO
NOT
talk or chew when measurement is being taken.
DO NOT take a series of measurements without waiting at least 10 minutes
between measurements.
DO
NOT
adjust medication based on readings from this Monitor.
DO
NOT
make any adjustments to unit, there are no user serviceable parts.
Call l-800-597-5978 for further instructions.
DO
NOT
smoke during or at least 30 minutes prior to taking blood pressure
measurements.
DO
NOT
drop or otherwise mechanically shock the Monitor. This is a delicate
precision device.
DO NOT use thinner, alcohol, benzene or wet cloth to clean unit.
DO NOT subject to extremes in temperature, humidity, direct sunlight or dust.
DO NOT fold the Arm Cuff or Rubber Cuff Hose tightly during storage, as
such treatment may shorten the life of the components.
Manufactured to meet specifications set by the Association for the
Advancement of Medical Instrumentation (AAMI)