Samsung H1255A - Manual (Page 12)

10 SAMSUNG Washing Machine Owner’s Instructions
Washing a Load of Laundry
Memory selection button ( )
Press Memory button, select frequently used functions, press Start/Pause button to save the
settings automatically.
1. Press Power button.
2. Press Memory button.
: When you use this function for the first time - Press Memory button, select
frequently used functions (Wash+Rince+Spin) and then press Start/Pause button to
save the settings.
3. Put appropriate amount of detergent and softer depending on the amount of laundry,
and close the detergent drawer.
4. Press Start/Pause button.
• Washing, Rinse, and Spin can’t be separately selected.
How to set up Memory Course
Select frequently used functions after pressing Memory button:
• Select items of interest such as Temperature, Wash, Rinse, Spin, and so on.
• Your selection can be saved only if you set up all steps as like Wash+Rinse+Spin.
• Turn the Select Course dial to select other courses.
• Turn power off and turn on again to cancel Memory Course.
Washing clothes using Fuzzy Logic
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Logic"
automatic control system. When you select a wash programme, the machine will set the
correct temperature, washing time, and washing speed.
To wash clothes using the Fuzzy Logic programmes:
1. Turn on your sink's water faucet.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Add the detergent, softener, and prewash detergent (if necessary) into the
appropriate compartment.
Note: Prewash is only available when washing Towel, Cotton, Cotton 95˚C,
Cotton 75˚C, Coloureds, Bedding.
It is only necessary if your clothing is heavily soiled.
7. Turn the Fuzzy Control dial to select the
appropriate programme for the type of clothes
Towel, Cotton, Cotton 95˚C, Cotton 75˚C,
Coloureds, Quick, Wool, Delicate, Bedding, Clean
Tub. You will see the indicators light up on the
control panel.
8. At this time, you can control the wash temperature,
rinsing times, spin speed, delay time by pressing
the appropriate option button.
9. Press the Start/Pause button on the Fuzzy Control
dial and the wash cycle will begin. The process
indicator will light up and the remaining time for
the cycle will appear in the display.
Pause Option
Until water supply is completed after starting operation, it is possible to put in the laundry or take
out. If push Start/Pause button, the door is unlocked immediately.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on
continuously.
1200
1000
800
600
H1255A-02263A_UK-0927.indd 10 2005-09-27 ¿ААь 9:49:15